Zum Inhalt wechseln


Foto

Keine verbindung zur Fernsteuerung , nur Gimbal steuerbar...

dji phantom phantom 3 multicopter drohne phantom 3 prof.

  • Bitte melde dich an um zu Antworten
4 Antworten in diesem Thema

#1 De Dennis

De Dennis
  • 3 Beiträge

Geschrieben 10. Juni 2019 - 11:20

Moin ,

Hab eine Gebrauchte P3 Prof. Gekauft.

Alsooooo folgendes Problem (e)

 

Copter blinkt nach startvorgang Gelb , Gimbal LED Blinkt Rot , LED am "linkin Buttom" Blinkt Rot Grün.

Die Steuerung Blinkt unregelmäßig Rot Grün , Gimbal Lässt sich hoch runter Steuern sonst nix.

Die App Verbindet sich auch nicht.

 

Hab den Copter über USB am Gimbal an pc angeschlossen , zeigte mir 2 speicher, hab beide Formatiert.

Update von Firmware (1.3 bis 1.11 ) macht er nix , Auch die Steuerung nimmt Kein Update über über USB-Stick an.....

 

Mülltonne Oder zu Retten , Hoffe Jamand weiß Rat.....

 

 



#2 brendepe

brendepe
  • 455 Beiträge
  • DJI Inspire 1
    DJI Flamewheel F550 Pixhawk
    DJI Flamewheel F450 APM 2.6
    Racer mit GR 18
    Graupner MX20 u. MC20
    Gopro Hero4 black

Geschrieben 10. Juni 2019 - 11:30

Sei mir bitte nicht böse, aber das klingt ganz nach Error 60, also der Fehler liegt ca. 60 cm vom Sender weg.

In der Bedienungsanleitung steht beschrieben, wie Updates zu machen sind. Hier liegt meiner Meinung nach der Hund begraben.

 

Gruß Peter.


  • HeinzBot und hegauer gefällt das

#3 De Dennis

De Dennis
  • 3 Beiträge

Geschrieben 10. Juni 2019 - 18:01

Erstmal Danke Peter für die Antwort,

Ich habe Versucht ein Update zu machen,

(Oft Liegt der Fehler ja im Detail)

 

Habe mit der Firmware begonnen, Über DJI Seite runter geladen , entpakt und auf SD Karte .

Karte in den Copter und einschalten (nur Copter) Blinkt nur (Wie Beschrieben) vor sich hin...20 Min. lang gewartet....

Habe dann das nächste Update genommen das gleiche...

 

Das gleiche habe ich mit der Steuerung gemacht auch keine reaktion.

 

Startet der Copter das Update evtl. nicht weil schon die neuste Version drauf ist...

 

Meine Vermutung ist , das der vorbesitzer das update am Copter gemacht hat aber nicht an der Steuerung.

Habe im Netz gelesen das USB Anschluss an der Steuerung ein Defekt haben könnte.

Und deswegen den stick nicht erkennt... Wenn ich das handy anschliese fäng es an zu Laden...

 

 

 



#4 HeinzBot

HeinzBot
  • 364 Beiträge
  • Phantom 3 A

Geschrieben 11. Juni 2019 - 13:29

Ich würde dir die YouTube Videos von Arthur bezüglich der Updates empfehlen, oder aber du liest die Beiträge hier von Rusty zum Thema.
Da wird das gesamte Prozedere haarklein beschrieben, einfach loslegen ohne eine Peilung zu haben klappt nie❗️

#5 De Dennis

De Dennis
  • 3 Beiträge

Geschrieben 11. Juni 2019 - 23:27

Nabend,

Ich hab das Update geau wie im Video gemacht.

Dann passiert folgendes.....

https://www.youtube....h?v=aM1xxyXnVJw

 

Die Meldung.....

 

Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
 

 

Und hier der Leidensweg der Lady....

 

 [00014235][01 00] Firmware upgrade finished successfully.
 [00014344]Done.

 [00014375]Packet [C:\P3X_FW_V01.03.0020.bin] resumed, card sn [0x80ce5cf9].
 [00014411]Packet vlink 01.03.0020 <-> 01.01.0009.
 [00014476]Version checking[2]...
 [00014545][03 05][00] v34.2.0.8 -> v34.2.0.9 need upgrade.
 [00014625][03 06][00] v2.1.6.18 -> v2.2.6.19 need upgrade.
 [00014666][04 00][00] v1.36.0.0 -> v1.40.0.0 need upgrade.
 [00014719][09 00][00] v1.7.0.3 -> v1.7.0.3
 [00014825][11 00][00] v1.6.1.0 -> v1.7.0.0 need upgrade.
 [00014899][12 00][00] v1.8.0.0 -> v1.8.0.0
 [00014999][12 01][00] v1.8.0.0 -> v1.8.0.0
 [00015100][12 02][00] v1.8.0.0 -> v1.8.0.0
 [00015199][12 03][00] v1.8.0.0 -> v1.8.0.0
 [00027735][15 00][00] device not detected.
 [00027816][17 00][00] v1.1.1.2 -> v1.1.1.7 need upgrade.
 [00027949][17 01][00] v1.0.2.4 -> v1.0.2.7 need upgrade.
 [00027999][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00028034][01 00][05] v1.23.3419 -> v1.23.3419
 [00028067][01 01][00] v1.6.2736 -> v1.23.3419 need upgrade
 [00040600][08 00][00] device not detected.
 [00040634]Done.

 [00040669]Firmware upgrading[2]...
 [00040808][01 01] Firmware upgrade start...
 [00071065][01 01] Firmware upgrade finished successfully.
 [00071122][17 00] Firmware upgrade start...
 [00166117][17 00] Firmware upgrade finished successfully.
 [00166163][17 01] Firmware upgrade start...
 [00227921][17 01] Firmware upgrade finished successfully.
 [00227967][11 00] Firmware upgrade start...
 [00283355][11 00] Firmware upgrade finished successfully.
 [00283406][03 05] Firmware upgrade start...
 [00360698][03 05] Firmware upgrade finished successfully.
 [00360914][03 06] Firmware upgrade start...
 [00656444][03 06] Firmware upgrade finished successfully.
 [00656509][04 00] Firmware upgrade start...
 [00714106][04 00] Firmware upgrade finished successfully.
 [00714141]Done.

 [00714175]Version checking[3]...
 [00714238][03 05][05] v34.2.0.9 -> v34.2.0.9
 [00714322][03 06][05] v2.2.6.19 -> v2.2.6.19
 [00714361][04 00][05] v1.40.0.0 -> v1.40.0.0
 [00714498][09 00][00] v1.7.0.3 -> v1.7.0.3
 [00714622][11 00][05] v1.7.0.0 -> v1.7.0.0
 [00714722][12 00][00] v1.8.0.0 -> v1.8.0.0
 [00714822][12 01][00] v1.8.0.0 -> v1.8.0.0
 [00714907][12 02][00] v1.8.0.0 -> v1.8.0.0
 [00714992][12 03][00] v1.8.0.0 -> v1.8.0.0
 [00727530][15 00][00] device not detected.
 [00727608][17 00][05] v1.1.1.7 -> v1.1.1.7
 [00727729][17 01][05] v1.0.2.7 -> v1.0.2.7
 [00727778][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00727811][01 00][05] v1.23.3419 -> v1.23.3419
 [00727843][01 01][05] v1.23.3419 -> v1.23.3419
 [00740380][08 00][00] device not detected.
 [00740411]Packet upgrade failed at version checking.



 [00014706]========== remo-con disconnect. boot(15) ============
 [00014741]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce5cf9].
 [00014782]Packet upgrade start...

 [00014820]Packet checking...
 [00014858]Packet vlink 01.03.0020 <-> 01.01.0009.
 [00014924]Done.

 [00014957]Version checking[1]...
 [00015036][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015116][03 06][00] v2.2.6.19 -> v2.2.6.19
 [00015159][04 00][00] v1.40.0.0 -> v1.40.0.0
 [00015215][09 00][00] v1.7.0.3 -> v1.7.0.3
 [00015362][11 00][00] v1.7.0.0 -> v1.7.0.0
 [00015444][12 00][00] v1.8.0.0 -> v1.8.0.0
 [00015534][12 01][00] v1.8.0.0 -> v1.8.0.0
 [00015624][12 02][00] v1.8.0.0 -> v1.8.0.0
 [00015709][12 03][00] v1.8.0.0 -> v1.8.0.0
 [00028245][15 00][00] device not detected.
 [00028324][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00028464][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00028515][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00028550][01 00][00] v1.23.3419 -> v1.23.3419
 [00028586][01 01][00] v1.23.3419 -> v1.23.3419
 [00041122][08 00][00] device not detected.
 [00041156]Packet upgrade failed at version checking.



 [00014536]========== remo-con disconnect. boot(15) ============
 [00014569]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x80ce5cf9].
 [00014600]Packet upgrade start...

 [00014638]Packet checking...
 [00014668]Packet vlink 01.08.0080 <-> 01.07.0060.
 [00014821]Done.

 [00014853]Version checking[1]...
 [00014916][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015001][03 06][00] v2.2.6.19 -> v2.4.14.5 need upgrade.
 [00015039][04 00][00] v1.40.0.0 -> v1.44.0.0 need upgrade.
 [00015141][11 00][00] v1.7.0.0 -> v1.7.15.1 need upgrade.
 [00015216][12 00][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
 [00015295][12 01][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
 [00015392][12 02][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
 [00015492][12 03][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
 [00028026][15 00][00] device not detected.
 [00028106][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00028226][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00028271][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00028304][01 00][00] v1.23.3419 -> v1.30.5036 need upgrade
 [00028348][01 01][00] v1.23.3419 -> v1.30.5036 need upgrade
 [00040884][08 00][00] device not detected.
 [00040931][09 00][00] v1.7.0.3 -> v3.0.0.10 need upgrade.
 [00040965]Done.

 [00042996]Waiting for user confirm...
 [00053030]Timeout, start upgrade automatically.

 [00053102]Firmware upgrading[1]...
 [00065904][01 00] Firmware upgrade start...
 [00014250][01 00] Firmware upgrade finished successfully.
 [00014285]Done.

 [00014319]Packet [C:\P3X_FW_V01.08.0080.bin] resumed, card sn [0x80ce5cf9].
 [00014358]Packet vlink 01.08.0080 <-> 01.07.0060.
 [00014427]Version checking[2]...
 [00014493][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00014584][03 06][00] v2.2.6.19 -> v2.4.14.5 need upgrade.
 [00014623][04 00][00] v1.40.0.0 -> v1.44.0.0 need upgrade.
 [00014737][11 00][00] v1.7.0.0 -> v1.7.15.1 need upgrade.
 [00014802][12 00][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
 [00014892][12 01][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
 [00014968][12 02][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
 [00015048][12 03][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
 [00027596][15 00][00] device not detected.
 [00027662][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00027768][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00027827][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00027862][01 00][05] v1.30.5036 -> v1.30.5036
 [00027972][01 01][00] v1.23.3419 -> v1.30.5036 need upgrade
 [00040505][08 00][00] device not detected.
 [00040548][09 00][00] v1.7.0.3 -> v3.0.0.10 need upgrade.
 [00040582]Done.

 [00040621]Firmware upgrading[2]...
 [00040764][01 01] Firmware upgrade start...
 [00071030][01 01] Firmware upgrade finished successfully.
 [00071082][12 00] Firmware upgrade start...
 [00133869][12 00] Firmware upgrade finished successfully.
 [00133919][12 01] Firmware upgrade start...
 [00201136][12 01] Firmware upgrade finished successfully.
 [00201186][12 02] Firmware upgrade start...
 [00264220][12 02] Firmware upgrade finished successfully.
 [00264274][12 03] Firmware upgrade start...
 [00327168][12 03] Firmware upgrade finished successfully.
 [00327214][11 00] Firmware upgrade start...
 [00375172][11 00] Firmware upgrade finished successfully.
 [00375414][03 06] Firmware upgrade start...
 [00726000][03 06] Firmware upgrade finished successfully.
 [00726061][09 00] Firmware upgrade start...
 [00778127][09 00] Firmware upgrade finished successfully.
 [00778197][04 00] Firmware upgrade start...
 [00836723][04 00] Firmware upgrade finished successfully.
 [00836763]Done.

 [00836800]Version checking[3]...
 [00836869][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00836934][03 06][05] v2.4.14.5 -> v2.4.14.5
 [00836973][04 00][05] v1.44.0.0 -> v1.44.0.0
 [00837072][11 00][05] v1.7.15.1 -> v1.7.15.1
 [00837168][12 00][05] v1.10.0.0 -> v1.10.0.0
 [00837247][12 01][05] v1.10.0.0 -> v1.10.0.0
 [00837323][12 02][05] v1.10.0.0 -> v1.10.0.0
 [00837406][12 03][05] v1.10.0.0 -> v1.10.0.0
 [00849944][15 00][00] device not detected.
 [00850020][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00850158][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00850203][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00850240][01 00][05] v1.30.5036 -> v1.30.5036
 [00850281][01 01][05] v1.30.5036 -> v1.30.5036
 [00862816][08 00][00] device not detected.
 [00862884][09 00][05] v3.0.0.10 -> v3.0.0.10
 [00862917]Packet upgrade failed at version checking.



 [00015381]========== 2019.05.06 15:47:32. boot(15) ============
 [00015420]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xec1726fd].
 [00015460]Packet upgrade start...

 [00015503]Packet checking...
 [00015543]Packet vlink 01.11.0020 <-> 01.11.0020.
 [00015611]Done.

 [00015648]Version checking[1]...
 [00015733][03 06][00] v2.4.14.5 -> v2.4.20.50 need upgrade.
 [00015811][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015854][04 00][00] v1.44.0.0 -> v1.48.0.0 need upgrade.
 [00015991][11 00][00] v1.7.15.1 -> v1.8.0.0 need upgrade.
 [00016133][11 01][00] v1.7.15.1 -> v2.0.0.33, firmware v1.7.15.1 not support.
 [00016172][11 01][00] v1.7.15.1 -> v2.0.0.33
 [00016260][12 00][00] v1.10.0.0 -> v1.12.0.0 need upgrade.
 [00016335][12 01][00] v1.10.0.0 -> v1.12.0.0 need upgrade.
 [00016418][12 02][00] v1.10.0.0 -> v1.12.0.0 need upgrade.
 [00016514][12 03][00] v1.10.0.0 -> v1.12.0.0 need upgrade.
 [00029061][15 00][00] device not detected.
 [00029156][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00029301][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00029362][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00029401][01 00][00] v1.30.5036 -> v1.32.5432 need upgrade
 [00029445][01 01][00] v1.30.5036 -> v1.32.5432 need upgrade
 [00041991][08 00][00] device not detected.
 [00042047][09 00][00] v3.0.0.10 -> v4.1.0.0 need upgrade.
 [00042086]Done.

 [00044133]Waiting for user confirm...
 [00054170]Timeout, start upgrade automatically.

 [00054244]Firmware upgrading[1]...
 [00068259][01 00] Firmware upgrade start...
 [00014237][01 00] Firmware upgrade finished successfully.
 [00014338]Done.

 [00014380]Packet [C:\P3X_FW_V01.11.0020.bin] resumed, card sn [0xec1726fd].
 [00014425]Packet vlink 01.11.0020 <-> 01.11.0020.
 [00014491]Version checking[2]...
 [00014568][03 06][00] v2.4.14.5 -> v2.4.20.50 need upgrade.
 [00014629][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00014674][04 00][00] v1.44.0.0 -> v1.48.0.0 need upgrade.
 [00014787][11 00][00] v1.7.15.1 -> v1.8.0.0 need upgrade.
 [00014907][11 01][00] v1.7.15.1 -> v2.0.0.33, firmware v1.7.15.1 not support.
 [00015031][11 01][00] v1.7.15.1 -> v2.0.0.33
 [00015127][12 00][00] v1.10.0.0 -> v1.12.0.0 need upgrade.
 [00015200][12 01][00] v1.10.0.0 -> v1.12.0.0 need upgrade.
 [00015307][12 02][00] v1.10.0.0 -> v1.12.0.0 need upgrade.
 [00015381][12 03][00] v1.10.0.0 -> v1.12.0.0 need upgrade.
 [00027926][15 00][00] device not detected.
 [00027993][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00028111][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00028176][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00028230][01 00][05] v1.32.5432 -> v1.32.5432
 [00028270][01 01][00] v1.30.5036 -> v1.32.5432 need upgrade
 [00040810][08 00][00] device not detected.
 [00040879][09 00][00] v3.0.0.10 -> v4.1.0.0 need upgrade.
 [00040920]Done.

 [00040957]Firmware upgrading[2]...
 [00041113][01 01] Firmware upgrade start...
 [00071387][01 01] Firmware upgrade finished successfully.
 [00071444][12 00] Firmware upgrade start...
 [00135515][12 00] Firmware upgrade finished successfully.
 [00135571][12 01] Firmware upgrade start...
 [00194878][12 01] Firmware upgrade finished successfully.
 [00194935][12 02] Firmware upgrade start...
 [00254365][12 02] Firmware upgrade finished successfully.
 [00254423][12 03] Firmware upgrade start...
 [00318287][12 03] Firmware upgrade finished successfully.
 [00318335][11 00] Firmware upgrade start...
 [00365307][11 00] Firmware upgrade finished successfully.
 [00365594][03 06] Firmware upgrade start...
 [00728775][03 06] Firmware upgrade finished successfully.
 [00728843][09 00] Firmware upgrade start...
 [00781175][09 00] Firmware upgrade finished successfully.
 [00781251][04 00] Firmware upgrade start...
 [00839149][04 00] Firmware upgrade finished successfully.
 [00839186]Done.

 [00839229]Version checking[3]...
 [00839308][03 06][05] v2.4.20.50 -> v2.4.20.50
 [00839389][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00839439][04 00][05] v1.48.0.0 -> v1.48.0.0
 [00839549][11 00][05] v1.8.0.0 -> v1.8.0.0
 [00839653][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
 [00839790][11 01][00] v1.8.0.0 -> v2.0.0.33
 [00839881][12 00][05] v1.12.0.0 -> v1.12.0.0
 [00839956][12 01][05] v1.12.0.0 -> v1.12.0.0
 [00840038][12 02][05] v1.12.0.0 -> v1.12.0.0
 [00840117][12 03][05] v1.12.0.0 -> v1.12.0.0
 [00852654][15 00][00] device not detected.
 [00852737][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00852856][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00852927][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00852968][01 00][05] v1.32.5432 -> v1.32.5432
 [00853008][01 01][05] v1.32.5432 -> v1.32.5432
 [00865564][08 00][00] device not detected.
 [00865615][09 00][05] v4.1.0.0 -> v4.1.0.0
 [00865660]Packet upgrade failed at version checking.



 [00145447]========== remo-con disconnect. boot(15) ============
 [00145485]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xda60a2a7].
 [00145528]Packet upgrade start...

 [00145573]Packet checking...
 [00145614]Packet vlink 01.11.0020 <-> 01.11.0020.
 [00145685]Done.

 [00145728]Version checking[1]...
 [00145823][03 06][00] v2.4.20.50 -> v2.4.20.50
 [00145904][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00145951][04 00][00] v1.48.0.0 -> v1.48.0.0
 [00146084][11 00][00] v1.8.0.0 -> v1.8.0.0
 [00146202][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
 [00146242][11 01][00] v1.8.0.0 -> v2.0.0.33
 [00146338][12 00][00] v1.12.0.0 -> v1.12.0.0
 [00146438][12 01][00] v1.12.0.0 -> v1.12.0.0
 [00146549][12 02][00] v1.12.0.0 -> v1.12.0.0
 [00146649][12 03][00] v1.12.0.0 -> v1.12.0.0
 [00015178]========== remo-con disconnect. boot(0) ============
 [00015219]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xda60a2a7].
 [00015259]Packet upgrade start...

 [00015308]Packet checking...
 [00015350]Packet vlink 01.11.0020 <-> 01.11.0020.
 [00015421]Done.

 [00015464]Version checking[1]...
 [00015545][03 06][00] v2.4.20.50 -> v2.4.20.50
 [00015631][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015676][04 00][00] v1.48.0.0 -> v1.48.0.0
 [00015785][11 00][00] v1.8.0.0 -> v1.8.0.0
 [00015906][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
 [00016027][11 01][00] v1.8.0.0 -> v2.0.0.33
 [00016117][12 00][00] v1.12.0.0 -> v1.12.0.0
 [00016221][12 01][00] v1.12.0.0 -> v1.12.0.0
 [00016318][12 02][00] v1.12.0.0 -> v1.12.0.0
 [00016417][12 03][00] v1.12.0.0 -> v1.12.0.0
 [00028958][15 00][00] device not detected.
 [00029052][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00029172][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00029229][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00029269][01 00][00] v1.32.5432 -> v1.32.5432
 [00029313][01 01][00] v1.32.5432 -> v1.32.5432
 [00041857][08 00][00] device not detected.
 [00041928][09 00][00] v4.1.0.0 -> v4.1.0.0
 [00041968]Packet upgrade failed at version checking.



 [00015197]========== remo-con disconnect. boot(15) ============
 [00015239]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xda60a2a7].
 [00015280]Packet upgrade start...

 [00015338]Packet checking...
 [00015380]Packet vlink 01.11.0020 <-> 01.11.0020.
 [00015451]Done.

 [00015491]Version checking[1]...
 [00015581][03 06][00] v2.4.20.50 -> v2.4.20.50
 [00015660][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015709][04 00][00] v1.48.0.0 -> v1.48.0.0
 [00015827][11 00][00] v1.8.0.0 -> v1.8.0.0
 [00015945][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
 [00015985][11 01][00] v1.8.0.0 -> v2.0.0.33
 [00016073][12 00][00] v1.12.0.0 -> v1.12.0.0
 [00016170][12 01][00] v1.12.0.0 -> v1.12.0.0
 [00016252][12 02][00] v1.12.0.0 -> v1.12.0.0
 [00016327][12 03][00] v1.12.0.0 -> v1.12.0.0
 [00028876][15 00][00] device not detected.
 [00028969][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00029090][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00029160][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00029207][01 00][00] v1.32.5432 -> v1.32.5432
 [00029251][01 01][00] v1.32.5432 -> v1.32.5432
 [00041803][08 00][00] device not detected.
 [00041861][09 00][00] v4.1.0.0 -> v4.1.0.0
 [00041901]Packet upgrade failed at version checking.



 [00015074]========== remo-con disconnect. boot(15) ============
 [00015202]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x50e05f8e].
 [00015245]Packet upgrade start...

 [00015289]Packet checking...
 [00015330]Packet vlink 01.03.0020 <-> 01.01.0009.
 [00015401]Done.

 [00015444]Version checking[1]...
 [00015528][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015608][03 06][00] v2.4.20.50 -> v2.2.6.19
 [00015663][04 00][00] v1.48.0.0 -> v1.40.0.0
 [00015724][09 00][00] v4.1.0.0 -> v1.7.0.3
 [00015852][11 00][00] v1.8.0.0 -> v1.7.0.0
 [00015948][12 00][00] v1.12.0.0 -> v1.8.0.0
 [00016037][12 01][00] v1.12.0.0 -> v1.8.0.0
 [00016137][12 02][00] v1.12.0.0 -> v1.8.0.0
 [00016237][12 03][00] v1.12.0.0 -> v1.8.0.0
 [00028790][15 00][00] device not detected.
 [00028914][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00029053][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00029103][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00029145][01 00][00] v1.32.5432 -> v1.23.3419
 [00029183][01 01][00] v1.32.5432 -> v1.23.3419
 [00041727][08 00][00] device not detected.
 [00041766]Packet upgrade failed at version checking.



 [00014695]========== remo-con disconnect. boot(15) ============
 [00014737]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x50e05f8e].
 [00014780]Packet upgrade start...

 [00014832]Packet checking...
 [00014874]Packet vlink 01.11.0020 <-> 01.11.0020.
 [00014951]Done.

 [00014999]Version checking[1]...
 [00015089][03 06][00] v2.4.20.50 -> v2.4.20.50
 [00015169][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015218][04 00][00] v1.48.0.0 -> v1.48.0.0
 [00015351][11 00][00] v1.8.0.0 -> v1.8.0.0
 [00015470][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
 [00015512][11 01][00] v1.8.0.0 -> v2.0.0.33
 [00015602][12 00][00] v1.12.0.0 -> v1.12.0.0
 [00015709][12 01][00] v1.12.0.0 -> v1.12.0.0
 [00015811][12 02][00] v1.12.0.0 -> v1.12.0.0
 [00015922][12 03][00] v1.12.0.0 -> v1.12.0.0
 [00028467][15 00][00] device not detected.
 [00028553][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00028673][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00028732][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00028854][01 00][00] v1.32.5432 -> v1.32.5432
 [00028906][01 01][00] v1.32.5432 -> v1.32.5432
 [00041451][08 00][00] device not detected.
 [00041511][09 00][00] v4.1.0.0 -> v4.1.0.0
 [00041556]Packet upgrade failed at version checking.



 [00014696]========== remo-con disconnect. boot(15) ============
 [00014736]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x50e05f8e].
 [00014777]Packet upgrade start...

 [00014823]Packet checking...
 [00014868]Packet vlink 01.03.0020 <-> 01.01.0009.
 [00014940]Done.

 [00014981]Version checking[1]...
 [00015070][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015135][03 06][00] v2.4.20.50 -> v2.2.6.19
 [00015184][04 00][00] v1.48.0.0 -> v1.40.0.0
 [00015264][09 00][00] v4.1.0.0 -> v1.7.0.3
 [00015369][11 00][00] v1.6.1.0 -> v1.7.0.0 need upgrade.
 [00015458][12 00][00] v1.12.0.0 -> v1.8.0.0
 [00015559][12 01][00] v1.12.0.0 -> v1.8.0.0
 [00015638][12 02][00] v1.12.0.0 -> v1.8.0.0
 [00015719][12 03][00] v1.12.0.0 -> v1.8.0.0
 [00028264][15 00][00] device not detected.
 [00028359][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00028499][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00028565][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00028607][01 00][00] v1.32.5432 -> v1.23.3419
 [00028651][01 01][00] v1.32.5432 -> v1.23.3419
 [00041193][08 00][00] device not detected.
 [00041237]Done.

 [00043280]Waiting for user confirm...
 [00053322]Timeout, start upgrade automatically.

 [00053404]Firmware upgrading[1]...
 [00053463][11 00] Firmware upgrade start...
 [00101034][11 00] Firmware upgrade finished successfully.
 [00101077]Done.

 [00101120]Version checking[2]...
 [00101194][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00101294][03 06][00] v2.4.20.50 -> v2.2.6.19
 [00101350][04 00][00] v1.48.0.0 -> v1.40.0.0
 [00101408][09 00][00] v4.1.0.0 -> v1.7.0.3
 [00101553][11 00][05] v1.7.0.0 -> v1.7.0.0
 [00101643][12 00][00] v1.12.0.0 -> v1.8.0.0
 [00101744][12 01][00] v1.12.0.0 -> v1.8.0.0
 [00101848][12 02][00] v1.12.0.0 -> v1.8.0.0
 [00101949][12 03][00] v1.12.0.0 -> v1.8.0.0
 [00114587][15 00][00] device not detected.
 [00114684][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00114827][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00114889][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00114933][01 00][00] v1.32.5432 -> v1.23.3419
 [00114977][01 01][00] v1.32.5432 -> v1.23.3419
 [00127530][08 00][00] device not detected.
 [00127573]Packet upgrade failed at version checking.



 [00014729]========== remo-con disconnect. boot(15) ============
 [00014771]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x50e05f8e].
 [00014817]Packet upgrade start...

 [00014868]Packet checking...
 [00014912]Packet vlink 01.03.0020 <-> 01.01.0009.
 [00014990]Done.

 [00015039]Version checking[1]...
 [00015113][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015194][03 06][00] v2.4.20.50 -> v2.2.6.19
 [00015247][04 00][00] v1.48.0.0 -> v1.40.0.0
 [00015319][09 00][00] v4.1.0.0 -> v1.7.0.3
 [00015434][11 00][00] v1.7.0.0 -> v1.7.0.0
 [00015523][12 00][00] v1.12.0.0 -> v1.8.0.0
 [00015604][12 01][00] v1.12.0.0 -> v1.8.0.0
 [00015703][12 02][00] v1.12.0.0 -> v1.8.0.0
 [00015786][12 03][00] v1.12.0.0 -> v1.8.0.0
 [00028335][15 00][00] device not detected.
 [00028425][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00028559][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00028620][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00028670][01 00][00] v1.32.5432 -> v1.23.3419
 [00028715][01 01][00] v1.32.5432 -> v1.23.3419
 [00041269][08 00][00] device not detected.
 [00041315]Packet upgrade failed at version checking.



 [00014589]========== remo-con disconnect. boot(15) ============
 [00014636]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x50e05f8e].
 [00014681]Packet upgrade start...

 [00014732]Packet checking...
 [00014773]Packet vlink 01.11.0020 <-> 01.11.0020.
 [00014860]Done.

 [00014904]Version checking[1]...
 [00014977][03 06][00] v2.4.20.50 -> v2.4.20.50
 [00015057][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015108][04 00][00] v1.48.0.0 -> v1.48.0.0
 [00015219][11 00][00] v1.7.0.0 -> v1.8.0.0 need upgrade.
 [00015418][11 01][00] v1.7.0.0 -> v2.0.0.33, firmware v1.7.0.0 not support.
 [00015464][11 01][00] v1.7.0.0 -> v2.0.0.33
 [00015558][12 00][00] v1.12.0.0 -> v1.12.0.0
 [00015647][12 01][00] v1.12.0.0 -> v1.12.0.0
 [00015746][12 02][00] v1.12.0.0 -> v1.12.0.0
 [00015828][12 03][00] v1.12.0.0 -> v1.12.0.0
 [00028374][15 00][00] device not detected.
 [00028489][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00028632][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00028707][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00028755][01 00][00] v1.32.5432 -> v1.32.5432
 [00028804][01 01][00] v1.32.5432 -> v1.32.5432
 [00041352][08 00][00] device not detected.
 [00041428][09 00][00] v4.1.0.0 -> v4.1.0.0
 [00041471]Done.

 [00043519]Waiting for user confirm...
 [00053564]Timeout, start upgrade automatically.

 [00053654]Firmware upgrading[1]...
 [00053709][11 00] Firmware upgrade start...
 [00100857][11 00] Firmware upgrade finished successfully.
 [00100902]Done.

 [00100951]Version checking[2]...
 [00101022][03 06][00] v2.4.20.50 -> v2.4.20.50
 [00101102][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00101157][04 00][00] v1.48.0.0 -> v1.48.0.0
 [00101282][11 00][05] v1.8.0.0 -> v1.8.0.0
 [00101402][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
 [00101451][11 01][00] v1.8.0.0 -> v2.0.0.33
 [00101536][12 00][00] v1.12.0.0 -> v1.12.0.0
 [00101643][12 01][00] v1.12.0.0 -> v1.12.0.0
 [00101731][12 02][00] v1.12.0.0 -> v1.12.0.0
 [00101823][12 03][00] v1.12.0.0 -> v1.12.0.0
 [00114369][15 00][00] device not detected.
 [00114455][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00114581][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00114653][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00114703][01 00][00] v1.32.5432 -> v1.32.5432
 [00114759][01 01][00] v1.32.5432 -> v1.32.5432
 [00127307][08 00][00] device not detected.
 [00127373][09 00][00] v4.1.0.0 -> v4.1.0.0
 [00127429]Packet upgrade failed at version checking.



 [00014893]========== remo-con disconnect. boot(15) ============
 [00014944]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x0030be6a].
 [00015087]Packet upgrade start...

 [00015141]Packet checking...
 [00015186]Packet vlink 01.11.0020 <-> 01.11.0020.
 [00015266]Done.

 [00015314]Version checking[1]...
 [00015387][03 06][00] v2.4.20.50 -> v2.4.20.50
 [00015470][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015547][04 00][00] v1.48.0.0 -> v1.48.0.0
 [00015670][11 00][00] v1.8.0.0 -> v1.8.0.0
 [00015808][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
 [00015854][11 01][00] v1.8.0.0 -> v2.0.0.33
 [00015942][12 00][00] v1.12.0.0 -> v1.12.0.0
 [00016037][12 01][00] v1.12.0.0 -> v1.12.0.0
 [00016117][12 02][00] v1.12.0.0 -> v1.12.0.0
 [00016216][12 03][00] v1.12.0.0 -> v1.12.0.0
 [00028762][15 00][00] device not detected.
 [00028851][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00028971][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00029038][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00029087][01 00][00] v1.32.5432 -> v1.32.5432
 [00029137][01 01][00] v1.32.5432 -> v1.32.5432
 [00041690][08 00][00] device not detected.
 [00041758][09 00][00] v4.1.0.0 -> v4.1.0.0
 [00041804]Packet upgrade failed at version checking.



 [00014734]========== remo-con disconnect. boot(15) ============
 [00014850]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x0030be6a].
 [00014893]Packet upgrade start...

 [00014965]Packet checking...
 [00015013]Packet vlink 01.11.0020 <-> 01.11.0020.
 [00015094]Done.

 [00015143]Version checking[1]...
 [00015237][03 06][00] v2.4.20.50 -> v2.4.20.50
 [00015337][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015392][04 00][00] v1.48.0.0 -> v1.48.0.0
 [00015534][11 00][00] v1.8.0.0 -> v1.8.0.0
 [00015655][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
 [00015701][11 01][00] v1.8.0.0 -> v2.0.0.33
 [00015808][12 00][00] v1.12.0.0 -> v1.12.0.0
 [00015908][12 01][00] v1.12.0.0 -> v1.12.0.0
 [00016008][12 02][00] v1.12.0.0 -> v1.12.0.0
 [00016109][12 03][00] v1.12.0.0 -> v1.12.0.0
 [00028660][15 00][00] device not detected.
 [00028759][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00028879][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00029045][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00029101][01 00][00] v1.32.5432 -> v1.32.5432
 [00029150][01 01][00] v1.32.5432 -> v1.32.5432
 [00041701][08 00][00] device not detected.
 [00041775][09 00][00] v4.1.0.0 -> v4.1.0.0
 [00041823]Packet upgrade failed at version checking.



 [00014687]========== remo-con disconnect. boot(15) ============
 [00014739]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x0030be6a].
 [00014786]Packet upgrade start...

 [00014843]Packet checking...
 [00014895]Packet vlink 01.08.0080 <-> 01.07.0060.
 [00014978]Done.

 [00015025]Version checking[1]...
 [00015113][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015199][03 06][00] v2.4.20.50 -> v2.4.14.5
 [00015254][04 00][00] v1.48.0.0 -> v1.44.0.0
 [00015369][11 00][00] v1.8.0.0 -> v1.7.15.1
 [00015463][12 00][00] v1.12.0.0 -> v1.10.0.0
 [00015564][12 01][00] v1.12.0.0 -> v1.10.0.0
 [00015668][12 02][00] v1.12.0.0 -> v1.10.0.0
 [00015769][12 03][00] v1.12.0.0 -> v1.10.0.0
 [00028324][15 00][00] device not detected.
 [00028440][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00028580][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00028659][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00028706][01 00][00] v1.32.5432 -> v1.30.5036
 [00028766][01 01][00] v1.32.5432 -> v1.30.5036
 [00041315][08 00][00] device not detected.
 [00041404][09 00][00] v4.1.0.0 -> v3.0.0.10
 [00041452]Packet upgrade failed at version checking.



 [00014776]========== remo-con disconnect. boot(15) ============
 [00014870]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x0030be6a].
 [00014982]Packet upgrade start...

 [00015041]Packet checking...
 [00015085]Packet vlink 01.03.0020 <-> 01.01.0009.
 [00015167]Done.

 [00015223]Version checking[1]...
 [00015301][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015380][03 06][00] v2.4.20.50 -> v2.2.6.19
 [00015441][04 00][00] v1.48.0.0 -> v1.40.0.0
 [00015509][09 00][00] v4.1.0.0 -> v1.7.0.3
 [00015622][11 00][00] v1.8.0.0 -> v1.7.0.0
 [00015714][12 00][00] v1.12.0.0 -> v1.8.0.0
 [00015884][12 01][00] v1.12.0.0 -> v1.8.0.0
 [00015980][12 02][00] v1.12.0.0 -> v1.8.0.0
 [00016071][12 03][00] v1.12.0.0 -> v1.8.0.0
 [00028621][15 00][00] device not detected.
 [00028730][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00028878][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00028951][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00029008][01 00][00] v1.32.5432 -> v1.23.3419
 [00029064][01 01][00] v1.32.5432 -> v1.23.3419
 [00041629][08 00][00] device not detected.
 [00041682]Packet upgrade failed at version checking.



 [00014772]========== remo-con disconnect. boot(15) ============
 [00014827]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x50e05f8e].
 [00014874]Packet upgrade start...

 [00014930]Packet checking...
 [00014979]Packet vlink 01.03.0020 <-> 01.01.0009.
 [00015067]Done.

 [00015118]Version checking[1]...
 [00015207][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015309][03 06][00] v2.4.20.50 -> v2.2.6.19
 [00015368][04 00][00] v1.48.0.0 -> v1.40.0.0
 [00015462][09 00][00] v4.1.0.0 -> v1.7.0.3
 [00015585][11 00][00] v1.8.0.0 -> v1.7.0.0
 [00015702][12 00][00] v1.12.0.0 -> v1.8.0.0
 [00015811][12 01][00] v1.12.0.0 -> v1.8.0.0
 [00015915][12 02][00] v1.12.0.0 -> v1.8.0.0
 [00016015][12 03][00] v1.12.0.0 -> v1.8.0.0
 [00028571][15 00][00] device not detected.
 [00028671][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00028816][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00028904][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00028953][01 00][00] v1.32.5432 -> v1.23.3419
 [00029006][01 01][00] v1.32.5432 -> v1.23.3419
 [00041557][08 00][00] device not detected.
 [00041605]Packet upgrade failed at version checking.



 [00014550]========== remo-con disconnect. boot(15) ============
 [00014601]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x50e05f8e].
 [00014649]Packet upgrade start...

 [00014704]Packet checking...
 [00014752]Packet vlink 01.03.0020 <-> 01.01.0009.
 [00014839]Done.

 [00014886]Version checking[1]...
 [00014968][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015050][03 06][00] v2.4.20.50 -> v2.2.6.19
 [00015192][04 00][00] v1.48.0.0 -> v1.40.0.0
 [00015287][09 00][00] v4.1.0.0 -> v1.7.0.3
 [00015448][11 00][00] v1.8.0.0 -> v1.7.0.0
 [00015569][12 00][00] v1.12.0.0 -> v1.8.0.0
 [00015652][12 01][00] v1.12.0.0 -> v1.8.0.0
 [00015759][12 02][00] v1.12.0.0 -> v1.8.0.0
 [00015856][12 03][00] v1.12.0.0 -> v1.8.0.0
 [00028408][15 00][00] device not detected.
 [00028513][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00028653][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00028739][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00028787][01 00][00] v1.32.5432 -> v1.23.3419
 [00028840][01 01][00] v1.32.5432 -> v1.23.3419
 [00041388][08 00][00] device not detected.
 [00041437]Packet upgrade failed at version checking.



 [00014780]========== remo-con disconnect. boot(15) ============
 [00014832]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x50e05f8e].
 [00014882]Packet upgrade start...

 [00014939]Packet checking...
 [00014997]Packet vlink 01.03.0020 <-> 01.01.0009.
 [00015083]Done.

 [00015136]Version checking[1]...
 [00015211][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015291][03 06][00] v2.4.20.50 -> v2.2.6.19
 [00015348][04 00][00] v1.48.0.0 -> v1.40.0.0
 [00015428][09 00][00] v4.1.0.0 -> v1.7.0.3
 [00015554][11 00][00] v1.8.0.0 -> v1.7.0.0
 [00015654][12 00][00] v1.12.0.0 -> v1.8.0.0
 [00015750][12 01][00] v1.12.0.0 -> v1.8.0.0
 [00015836][12 02][00] v1.12.0.0 -> v1.8.0.0
 [00015939][12 03][00] v1.12.0.0 -> v1.8.0.0
 [00028494][15 00][00] device not detected.
 [00028595][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00028715][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00028782][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00028838][01 00][00] v1.32.5432 -> v1.23.3419
 [00028894][01 01][00] v1.32.5432 -> v1.23.3419
 [00041451][08 00][00] device not detected.
 [00041500]Packet upgrade failed at version checking.



 [00014575]========== remo-con disconnect. boot(15) ============
 [00014628]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x50e05f8e].
 [00014676]Packet upgrade start...

 [00014733]Packet checking...
 [00014870]Packet vlink 01.03.0020 <-> 01.01.0009.
 [00014951]Done.

 [00015003]Version checking[1]...
 [00015097][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015177][03 06][00] v2.4.20.50 -> v2.2.6.19
 [00015252][04 00][00] v1.48.0.0 -> v1.40.0.0
 [00015328][09 00][00] v4.1.0.0 -> v1.7.0.3
 [00015457][11 00][00] v1.8.0.0 -> v1.7.0.0
 [00015547][12 00][00] v1.12.0.0 -> v1.8.0.0
 [00015646][12 01][00] v1.12.0.0 -> v1.8.0.0
 [00015746][12 02][00] v1.12.0.0 -> v1.8.0.0
 [00015846][12 03][00] v1.12.0.0 -> v1.8.0.0
 [00028404][15 00][00] device not detected.
 [00028511][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00028641][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00028707][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00028758][01 00][00] v1.32.5432 -> v1.23.3419
 [00028810][01 01][00] v1.32.5432 -> v1.23.3419
 [00041363][08 00][00] device not detected.
 [00041412]Packet upgrade failed at version checking.



 [00014577]========== remo-con disconnect. boot(15) ============
 [00014631]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x50e05f8e].
 [00014679]Packet upgrade start...

 [00014736]Packet checking...
 [00014785]Packet vlink 01.03.0020 <-> 01.01.0009.
 [00014872]Done.

 [00014923]Version checking[1]...
 [00015001][03 05][00] v34.2.0.9 -> v34.2.0.9
 [00015102][03 06][00] v2.4.20.50 -> v2.2.6.19
 [00015158][04 00][00] v1.48.0.0 -> v1.40.0.0
 [00015232][09 00][00] v4.1.0.0 -> v1.7.0.3
 [00015361][11 00][00] v1.8.0.0 -> v1.7.0.0
 [00015462][12 00][00] v1.12.0.0 -> v1.8.0.0
 [00015545][12 01][00] v1.12.0.0 -> v1.8.0.0
 [00015641][12 02][00] v1.12.0.0 -> v1.8.0.0
 [00015750][12 03][00] v1.12.0.0 -> v1.8.0.0
 [00028307][15 00][00] device not detected.
 [00028409][17 00][00] v1.1.1.7 -> v1.1.1.7
 [00028551][17 01][00] v1.0.2.7 -> v1.0.2.7
 [00028627][19 00][00] v1.0.8.96 -> v1.0.8.96
 [00028686][01 00][00] v1.32.5432 -> v1.23.3419
 [00028739][01 01][00] v1.32.5432 -> v1.23.3419
 [00041288][08 00][00] device not detected.
 [00041336]Packet upgrade failed at version checking.



 







Auch mit einem oder mehreren dieser Stichwörter versehen: dji, phantom, phantom 3, multicopter, drohne, phantom 3 prof.

Besucher die dieses Thema lesen: 0

Mitglieder: 0, Gäste: 0, unsichtbare Mitglieder: 0